Arcade Machine

Arcade Machine

Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.

Arcade Machine

Guolian Machinery -- GL-5000 Tape Cutting Machine

The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.

The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.

Product parameters:

Cutting length: 5 ~ 999 mm

Tape width: 6 ~ 50 mm

Maximum outer diameter: 300 mm

Speed: 200 mm/min

Weight: 2.8 kg

Size: 115mm X 140mm X 215mm

Arcade Machine

GL-704 Four-shaft Auto Roll Cutting Machine

GL-704 Four-shaft Auto Roll Cutting Machine, Suitable for cutting BOPP tape, PVC insulation tape, masking tape, double sided tape, duct tape, medical tape, etc.

 

Product Description

1.Main Motor: Cutting shaft and circular blade are driven by A.C motor with inverter control, which able to set RPM and running direction obverse/reserve on different requests.

2. Central Control: Central control system is CPU, which can cut various sizes on one log roll by changing modes automatically.

3. Display Mode: All functions are operated under LCD touch panel control, which is operator friendly and easy for data setting.

4. Width Setting: Width setting is controlled by servomotor with ball screw and guide rails to make accuracy movement.

5. Cutting System: Knife feeding is controlled by servomotor, which can do three-speed cutting.

6. Knife Angle Adjustment: Cutting angle can be changed automatically for making roll surface smoothly.

7. Shaft Change: Three kinds of cutting shafts for optional using on this machine, which use quick changing shaft according to different material.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com