Laminating Machine

Laminating Machine

Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.

Laminating Machine

PVC insulation tape electrical tape cutting machine

Product Application

The machine is suitable for cutting BOPP tapes, PVC tapes, PE tapes, masking paper tapes, double sided tapes, kraft paper tapes, foam tapes, duct tapes, industrial tapes, protective film, etc.

Parameter

efficient width: 1300mm, 1600mm

max. cutting diameter: 160mm

min. cutting width: 2mm

paper core ID: 38-76.2mm

diameter of circular blade: 180mm

size (L*W*H): 3000mm*1500mm*1550mm, 3500mm*1500mm*1550mm

 

Main Features

1) Easy to operate.

2) Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right.

3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, lineary or bit to make sure the cutting process accurate and perfect.

4) The face and back tube are supported by oil pressure to ensure the stability of mini pathway when it was cut.

5) Round knives cutting promotes the working efficiency.

Laminating Machine

1300mm Masking tape jumbo roll cutting cutter machine:

Feature

1. Automatic consecutive 4-shaft changing: 
when the rewinding operation is finished on one set of shafts, the machine will change automatically onto another set of shafts without any stop. It will have higher efficiency. 
2.Three-step length counter: Giving accurate pre-setting of rewinding length. 
3. Pneumatic brake: Brings the machine to an immediate halt when working at high speed because of inertia ,ensures excellent steady performance . 
4. Automatic tension control
5. (Optional) Auto labeling and slitting stationery tape functions
6. (Optional)auto loading device for heavy jumbo roll 

 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com