Milling Machine

Milling Machine

Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.

Milling Machine

GL-709 PVC electrical insulating adhesive tape slitting machine/aluminum foil roll tape cutter/BOPP gum tape cutting machine

roduct Application

GL-709 PVC electrical insulating adhesive tape slitting machine/aluminum foil roll tape cutter/BOPP gum tape cutting machine

Suitable for the cutting of BOPP, OPP, PE, PET, Aluminium and etc.

 

 

Milling Machine

Automatic adhesive tape log roll cutting machine:

Product Application

Automatic adhesive tape log roll cutting machine is designed to cut large diameter foam tape,double sided tape,masking tape ,non-woven tape,protective tape ,PET,PE electric protective tape, and all kind of adhesive tape from large width cut into small width.

Main Features

1) Main driving part : Using AC motor with inverter is employed ,the acceleration and the deceleration are fast and steady .

2)Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right. 

3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, linear or bit to make sure the cutting process accurate and perfect. 
4) The face and back tube are supported by oil pressure to ensure the stability of mini    pathway when it was cut.

5) Round knives cutting promotes the working efficiency. 

6)Cutting feed positioning system : Servo motor control ,3 phase speed feed ,improve efficiency and get best quality .

7)Setting a variety of sizes coaxial and automatically converts cutting .

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com