Brick Machine

Brick Machine

Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.

Brick Machine

Single shaft automatic foam tape slitting cutting machine:

Product Usage:

The machine is suitable for cutting BOPP tapes, PVC tapes, PE tapes, masking paper tapes, double sided tapes, kraft paper tapes, foam tapes, duct tapes, industrial tapes, protective film, etc.

 

Main Features:

1) Easy to operate.

2) Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right.

3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, lineary or bit to make sure the cutting process accurate and perfect.

4) The face and back tube are supported by oil pressure to ensure the stability of mini pathway when it was cut.

5) Round knife cutting promotes the working efficiency.

Brick Machine

factory made BOPP tape cutting slitting machine:

Product Description

FFactory price Semi Automatic OPP BOPP adhesive tape cutting slitting rewinding machine is an upgraded model for slitting and rewinding the BOPP OPP adhesive tape jumbo roll into small roll for sationary use,carton packing use etc. 
This machine is for a complete production line,include the main slitter rewinder,core loading machine,core cutting machine,and mini doctor rewinding machine
It is designed with 4 shaft automatic changing,when the rewinding reach the length set,it will switch into the next term of slitting by another two shaft. 
The latest Japanese tape slitting technology is adopted for the machine.It is warmly welcome in Europe,Mid East,USA etc. 
The different widht of model is available.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com