Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.
PVC electrical tape cutting machine for cutting BOPP, OPP, Cellophane tape, 3M, Mylar, Kapton, EVA,PE, PVC, Masking tape, Double-side adhesive tape, Kraft tape , Protective film, Duct tape , film roll etc. Auto Jumbo Roll Cutting Machine including the Semi-automatic roll cutting machine , single shaft roll cutting machine , double shaft roll cutting machine, YL-708 Fully Automatic 4 Shaft Tape Roll Cutting Machine.
For fully automatic roll cutting machine :
1. Machine with PLC control and color touch screen, easy and convenient to operate to worker,also improves the quality of the finished cut roll;
2. Can accoring to customer's requirments to set 10 differents cutting width and the angle of cutting.( if cutsomer needed maximum can reach 20 types);
3. with automatic spary silicone oil cooling system, thus the finished products with smooth and beautiful cutting surface;
4. Cutter with servo-motor control, apply for different material roll, also machine cutter move forward stablly and smoothly.
5. Cutter and the main shaft adpots AC motor. The high precision ball screw work with servo motor and he straight liner slide rail, machine running smoothly and cutting the material with high precision.
1300mm jumbo roll width tape manual cutting rewinding machine:
1. Simple structure, convenient operation and maintenance.
2. The power of the whole machine is only 3KW, which saves energy, the motor and the spindle are driven by the triangle belt, and the machine has low running noise.
3. The cutting shaft adopts high quality carbon steel, which is tempered, high frequency quenching and chromium plating (unilateral 0.05 mm). The hardness reaches HRC60, wear-resisting and cutting.
4. The cutting knife is carefully processed by W18Cr4V, with sharp edge and high durability.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc