Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.
1. Using ultrasonic cutting and edge treatment for melting, so smooth, no rough edges.
2. PLC touch-screen, automatic feed, the computer count, high precision, speed and adjust the length of simple and quick, efficient.
3. Widely been used in gifts belt, nylon belt strip, strip Ribbon, ribbon bar, such as chemical fiber cut straight knife, knife ramps, such as shape Dovetail
4. This machine can cut different shapes of the products, just need to change the cut knife. And also can cut Like:
Automatic double sided adhesive tape cutting machine:
This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting.
Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material.
You can cut different sizes according to different material.
1. Main driving system: AC motor with the frequency inverter.
Make sure the speed up or speed-down fast and steady during log roll cutting.
2. Central control unit: The programmable central control system.
You can cutting multiple sizes in the same log roll.
3. Operating panel: The 10'' big LCD panel.
You can set up various cutting model and monitor the cutting job directly in the panel.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc