Pellet Machine

Pellet Machine

Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.

Pellet Machine

Servo Motor Automatic Adhesive Tape Cutting Machine:

Product Description

1. Introduction for Automatic adhesive tape cutting machine

1.1 Application: Bopp Tape, PVC Tape, Double Side Tape, Film and Paper

1.2 Working Width: 1.3m, 1.6m

1.3 Shafts Design: Single shaft, double shafts, four shafts etc.

1.4 Configuration: PLC control with Servo Motor

 

Pellet Machine

Factory sale double shaft pvc tape cutting machine

Application:

This unit is suitable for cutting various materials such as PVC,OPP,PE,Masking tape,Double-dide tape,Kraft tape,cloth tape etc.

Feature:

1:Main driving parts:Ac motor with inverter is employed and the acceleration and deceleration are fast and stable

2:Central control unit:programmable central control is used and various sizes can be set on the same shaft by antomatic transfer and cutting .

3:Operating panel:all functions are operated on the LCD touch panel

4:Auto adjusting the circular blade angle:the serco motor is subject to different materials

 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com