Cryolipolysis Machine

Cryolipolysis Machine

Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.

Cryolipolysis Machine

Automatic cold knife nylon webbing tape ribbon cutter tape cutting machine

This machine is suitable for PP belt,zipper,nylon belt braided belt,elastic belt,magic stick,seat belt,shoulder belt,ribbon,tape,wire,casing,etc for Fixed length cutting.Suitable for belt,ready-made clothing,shoe making,leather bag,leather goods.Electronic and other manufacturing processing.

 

Features

1 High speed:                It can cut 100-120mm  pieces per minute (50mm length as an example)
2 High precision :         Cut-length is accurate owing to the control of microcomputer

3 section neat:            hot knife can heat-seal the section of color riband and light textile braid 
4 Knife :                          knife are made of imported high quality rolled steel,with long using life
5 Automatic operation: It works automatically only by setting length and quantity
6 Automatic stopper:    It stops automatically only by setting length and quantity.
7 Memory:                      Set-length,set-q'ty & set-speed are not erased even if power off & on 

8 Save document:         can save 9 documents,reduce setting time,if it's covenivent to take and operate

Cryolipolysis Machine

Aluminum Foil Tape/Kraft Paper Tape Double Sided Tape PET PVC OPP Slitting Rewinder Machine:

Usage:

The machine is suitable for slitting and rewinding various large roll materials,such as self-adhesive, paper,90goffset paper,PVC,plastic material,etc.

 

Main Characteristic:

1. The machine adopts two Servo motor control, automatic tension, center reeling way;

2. This machine adopts frequency control, to maintain smooth operation during acceleration

3.Auto counter meter, auto machine stop when had alarm.

4.The rewinding adopts A,B inflatable shaft,operate neatly and assemble conveniently.

5.The unwinding adopts ultrasonic wave correcting method.

6.The circular cutter with slitting slitter edge and automatic discharge device.

7,Air shaft automatic pneumatic loading structure.

 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com