Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.
It is suitable for cutting various materials, double sided adhesive, plastic-sided, self-adhesive labels, foam, film, foil, and so on.
Applicable to the electronics, automotive, medical, and printing products processing.
二. Functional characteristics:
A. speed: 0-65m/min, max width of original 330 mm.
B. Precision of die cutting: ±0.01mm, the precision of slice: ±0.01mm
C. Max sizes of finished die cutting:300mm*290mm, min width:80 mm
D. Winding/rewinding tension controlled by the computer fully automatically, its max tension: 15N
E. The operating panel adopts 5.7 inch color touching interface
F. It can operate the fully or semi cutting working( when operating, needless to adjust the pressure or others)
G. It can finish the semi cutting. Its min. thickness: 0.025mm
H. It can count meter/amount with the function of meter/ amount full to stop as well as no feeding to stop.
三. Main devices:
1. 1 sets of die cutting work station .
2. The work station drive by 3 Yaskwa Servo motor .
3. 2 sets of winding/ rewinding systems, ( converter, magnetic powder clutch)
4. Control color touching interface
5. Power of equipment: 8 kw
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc