Machine For

Machine For

Tape Cutting Machine Features:
 

1. Easy Operation,It can cut automaticlly once set up the cutting length and quantity.

2.Self protection Function,It will stop automaticlly if the materials run out during the operation.

3.High speed,it can cut 100-120pcs per minute(50mm length for example)

4.High Accuracy,the cutting length is accurate cwing to a stepping motor.

Machine For

Semi-automatic cutting machine technical operation rules

4. Mechanical operation
4.1 All parts must be carefully inspected before use and then tested. At the same time, check the gas distribution valves and torches and the connection path. If there is no problem, ignite and observe whether the flame is normal. If there is no problem, it can be cut.
4.2 When cutting straight lines, it is necessary to put a special track on the steel plate to be cut, select the cutting nozzle according to the cutting thickness, and adjust the speed before cutting.
4.3 Pressure automatic switch and pneumatic valve are normally open. When using automatic pressure switch, the knife switch at the label pressure switch should be pointed in the direction of closing. At this time, the pressure automatic switch is turned on during cutting. When walking, if the automatic switch is not used, the knife switch is pointed to the open position, so that the operation and stop of the cutting machine can be controlled only by controlling the on/off of the power label.
4.5 When cutting the circle, the radius rod should be installed in the screw hole of the body shell and locked, then the tip of the fixed needle should be placed in the hole of the pre-cut center, and the fixed needle can be adjusted to lift the cutting wheel of the cutting machine. To cut, if you need to cut the groove, you can reach the torch by turning it through a certain angle.
4.6 The forward and backward movement of the cutting machine (ie, forward and reverse operation) can be controlled by controlling the middle and reverse signs.

Machine For

Laser tape cutting machine---
Laser tape cutting machine is a new technology that has been used in various industries, including tape, metal cutting, glass cutting and engraving. A laser is a kind of light, like its electroluminescence in nature, is caused by the transition of atoms (molecular or ion kites) and is caused by spontaneous radiation. Although the laser is light, it is obviously different from ordinary light. The laser depends on spontaneous emission only in the initial very short time. The subsequent process is completely determined by the excitation radiation, so the laser has a very pure color and almost no divergent directionality. , engraving machine, extremely high luminous intensity. At the same time, the laser has high coherence, high strength and high directivity. After the laser is generated by the laser, it is transmitted by the mirror and irradiated onto the processed object through the collecting mirror, so that the processed object (surface) is subjected to strong heat energy and the temperature is sharply increased. This point is rapidly melted or vaporized due to high temperature, and the trajectory of the laser head is used to achieve the purpose of processing.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com