Press Machine

Press Machine

Tape Cutting Machine Usage:

The machine is suitable for cutting BOPP tapes, PVC tapes, PE tapes, masking paper tapes, double sided tapes, kraft paper tapes, foam tapes, duct tapes, industrial tapes, protective film, etc.

 

 

tape cutting machine Main Features:

1) Easy to operate.

2) Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right.

3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, lineary or bit to make sure the cutting process accurate and perfect.

4) The face and back tube are supported by oil pressure to ensure the stability of mini pathway when it was cut.

5) Round knife cutting promotes the working efficiency.

Press Machine

Semi-automatic cutting machine technical operation rules

4. Mechanical operation
4.1 All parts must be carefully inspected before use and then tested. At the same time, check the gas distribution valves and torches and the connection path. If there is no problem, ignite and observe whether the flame is normal. If there is no problem, it can be cut.
4.2 When cutting straight lines, it is necessary to put a special track on the steel plate to be cut, select the cutting nozzle according to the cutting thickness, and adjust the speed before cutting.
4.3 Pressure automatic switch and pneumatic valve are normally open. When using automatic pressure switch, the knife switch at the label pressure switch should be pointed in the direction of closing. At this time, the pressure automatic switch is turned on during cutting. When walking, if the automatic switch is not used, the knife switch is pointed to the open position, so that the operation and stop of the cutting machine can be controlled only by controlling the on/off of the power label.
4.5 When cutting the circle, the radius rod should be installed in the screw hole of the body shell and locked, then the tip of the fixed needle should be placed in the hole of the pre-cut center, and the fixed needle can be adjusted to lift the cutting wheel of the cutting machine. To cut, if you need to cut the groove, you can reach the torch by turning it through a certain angle.
4.6 The forward and backward movement of the cutting machine (ie, forward and reverse operation) can be controlled by controlling the middle and reverse signs.

Press Machine

utomatic tape tape cutting machine ---

With the continuous development of industrial technology, traditional manual work such as cutting tape is now replaced by machines. Tape cutting machine is also called adhesive paper cutting machine and tape machine.

Features:
• The tape is automatically peeled off, cut according to the set length, and the cut tape is continuously and side by side attached to the edge of the rotating disk.
·The tape cutting length and the bonding interval can be adjusted at will according to the needs of the user.
·The cut surface of the tape is not jagged and very neat.
· The work of the production staff and the tape-cutting personnel can be completely replaced by one person, and it is more labor-saving and efficient.
·With a special tape cutter, it is possible to cut off the tape with a liner.
· Suitable for a variety of small adhesive tapes attached to the board.
· Unique conveyor system for multiple people to use at the same time.
· Small size, light weight and easy to carry.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com