Tape Cutting Machine Usage:
The machine is suitable for cutting BOPP tapes, PVC tapes, PE tapes, masking paper tapes, double sided tapes, kraft paper tapes, foam tapes, duct tapes, industrial tapes, protective film, etc.
tape cutting machine Main Features:
1) Easy to operate.
2) Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right.
3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, lineary or bit to make sure the cutting process accurate and perfect.
4) The face and back tube are supported by oil pressure to ensure the stability of mini pathway when it was cut.
5) Round knife cutting promotes the working efficiency.
Laser tape cutting machine---
Laser tape cutting machine is a new technology that has been used in various industries, including tape, metal cutting, glass cutting and engraving. A laser is a kind of light, like its electroluminescence in nature, is caused by the transition of atoms (molecular or ion kites) and is caused by spontaneous radiation. Although the laser is light, it is obviously different from ordinary light. The laser depends on spontaneous emission only in the initial very short time. The subsequent process is completely determined by the excitation radiation, so the laser has a very pure color and almost no divergent directionality. , engraving machine, extremely high luminous intensity. At the same time, the laser has high coherence, high strength and high directivity. After the laser is generated by the laser, it is transmitted by the mirror and irradiated onto the processed object through the collecting mirror, so that the processed object (surface) is subjected to strong heat energy and the temperature is sharply increased. This point is rapidly melted or vaporized due to high temperature, and the trajectory of the laser head is used to achieve the purpose of processing.
GL-5000 tape cutter to cut two kinds of tape at the same time steps and precautions
If the tape width is less than 10 mm, insert the divider. This model can cut two tapes with a width of less than 25 mm at the same time.
1. Remove the divider from the bottom of the machine.
2. Press the press cover button to open the press cover.
3. If the tape width is less than 10 mm, insert the auxiliary spacer.
! Remove the auxiliary divider from the bottom of the machine and insert it into the junction of the divider.
4. Install the tape roll and move the width bar to adjust the tightness of the guide plate.
5. Import the tape and set the working mode.
! In the automatic mode, when cutting two sets of tape, take two pieces of tape and the machine will cut the two pieces of tape.
1. Forcibly cutting high-adhesive tape will affect the service life of the motor.
2. After using the divider and auxiliary dividers, return to the bottom of the machine.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc