Laser Welding Machine

Laser Welding Machine

Guolian tape slitting machine configuration instructions:
The central panel is easy to operate. Suitable for BOPP tape and all single-sided tape slitting.

1. This machine adopts Mitsubishi PLC control, LED touch screen displays input data.

2. AC motor drive, variable frequency speed control running speed, can effectively protect electrical components.

3. Magnetic braking, smooth braking.

4. The single-roll tape uses a silicone roller; the winding is free of air bubbles. Specializing in the production of ultra clear transparent tape.

5. Single-roll tape uses a precision pressure regulator to control pressure stability.

6. Automatic rewinding side material

8. Stop the machine automatically when the side material breaks

9. Plus hydraulic automatic feeding device

10. Do not stop automatic labeling

11. The two motors work together and the shaft is replaced efficiently without stopping the machine.

Laser Welding Machine

Semi-automatic cutting machine technical operation rules

4. Mechanical operation
4.1 All parts must be carefully inspected before use and then tested. At the same time, check the gas distribution valves and torches and the connection path. If there is no problem, ignite and observe whether the flame is normal. If there is no problem, it can be cut.
4.2 When cutting straight lines, it is necessary to put a special track on the steel plate to be cut, select the cutting nozzle according to the cutting thickness, and adjust the speed before cutting.
4.3 Pressure automatic switch and pneumatic valve are normally open. When using automatic pressure switch, the knife switch at the label pressure switch should be pointed in the direction of closing. At this time, the pressure automatic switch is turned on during cutting. When walking, if the automatic switch is not used, the knife switch is pointed to the open position, so that the operation and stop of the cutting machine can be controlled only by controlling the on/off of the power label.
4.5 When cutting the circle, the radius rod should be installed in the screw hole of the body shell and locked, then the tip of the fixed needle should be placed in the hole of the pre-cut center, and the fixed needle can be adjusted to lift the cutting wheel of the cutting machine. To cut, if you need to cut the groove, you can reach the torch by turning it through a certain angle.
4.6 The forward and backward movement of the cutting machine (ie, forward and reverse operation) can be controlled by controlling the middle and reverse signs.

Laser Welding Machine

utomatic tape tape cutting machine ---

With the continuous development of industrial technology, traditional manual work such as cutting tape is now replaced by machines. Tape cutting machine is also called adhesive paper cutting machine and tape machine.

Cutting range:
Cutting length: between 3-999mm
Cutting width: between 3-100mm
Such an automatic adhesive tape cutting machine can be used in the production and packaging processes of electronics, machinery and other factories: labeling, fixing, etc., can greatly improve work efficiency, save labor costs, and ensure the quality of work.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com