Guolian tape slitting machine configuration instructions:
The central panel is easy to operate. Suitable for BOPP tape and all single-sided tape slitting.
1. This machine adopts Mitsubishi PLC control, LED touch screen displays input data.
2. AC motor drive, variable frequency speed control running speed, can effectively protect electrical components.
3. Magnetic braking, smooth braking.
4. The single-roll tape uses a silicone roller; the winding is free of air bubbles. Specializing in the production of ultra clear transparent tape.
5. Single-roll tape uses a precision pressure regulator to control pressure stability.
6. Automatic rewinding side material
8. Stop the machine automatically when the side material breaks
9. Plus hydraulic automatic feeding device
10. Do not stop automatic labeling
11. The two motors work together and the shaft is replaced efficiently without stopping the machine.
Semi-automatic cutting machine technical operation rules
5. Control and monitoring methods for mechanical process parameters and characteristics
5.1 When installing the cross rail and main rail, pay attention to the adjustment screw should not be too tight or too loose. 5.2 The cutting tip should be installed so that it should not be tightened too tightly, no air leakage.
5.3 Before using the suction-type torch, the gas injection must be checked and pressed with the finger on the acetylene inlet valve head. Then open the oxygen valve and the acetylene valve. If there is suction on the finger, it means the torch is normal and can be used. If there is no suction, or oxygen flows back from the B-connector, the torch performance is abnormal and must be repaired.
6. Provisions for mechanical supervision and inspection
6.1 The cutting machine should pay attention to the good condition of each part in normal use, and solve the problem if it is found in time.
6.2 Strengthen maintenance and repairs should be carried out every year.
Guolian Machinery -- GL-5000 Tape Cutting Machine
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.
The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.
Cutting length: 5 ~ 999 mm
Tape width: 6 ~ 50 mm
Maximum outer diameter: 300 mm
Speed: 200 mm/min
Weight: 2.8 kg
Size: 115mm X 140mm X 215mm
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc