Cnc Lathe Machine

Cnc Lathe Machine

Guolian BOPP tape slitting and rewinding machine is used to cut and rewind the BOPP OPP tape into small rolls for daily use and carton packaging.
The machine is a complete production line including the main slitter rewinder, core loader, core cutter and mini doctor rewinder.
It is designed with a 4-axis automatic change. When the winding reaches the set length, it will switch from the other two axes to the next.
The machine adopts the latest Japanese tape cutting technology and is warmly welcomed by countries such as Europe, Middle East and America.
Can use models of different widths

Cnc Lathe Machine

Semi-automatic cutting machine technical operation rules
1. Scope of application
The semi-automatic cutting machine is a device for cutting medium and low carbon steel by flame using oxygen-acetylene (medium and low pressure) as a heat source. The machine can cut the straight line, the circle and the arc and the left and right 45 degree groove.
2. Qualification requirements for operators
2.1 The operator of the machine must be trained in safety professional skills.
2.2 The operator must understand how the machine is used and can handle faults that occur during operation.
3. Mechanical requirements for the working environment
3.1 This machine should not be used and stored in high humidity and high corrosion environment.
3.2 It is not advisable to carry out open-air operations in rainy and snowy weather and windy weather. If necessary, cover measures should be adopted.

Cnc Lathe Machine

GL-5000 tape cutter to cut two kinds of tape at the same time steps and precautions
If the tape width is less than 10 mm, insert the divider. This model can cut two tapes with a width of less than 25 mm at the same time.
1. Remove the divider from the bottom of the machine.
2. Press the press cover button to open the press cover.
3. If the tape width is less than 10 mm, insert the auxiliary spacer.
! Remove the auxiliary divider from the bottom of the machine and insert it into the junction of the divider.
4. Install the tape roll and move the width bar to adjust the tightness of the guide plate.
5. Import the tape and set the working mode.
! In the automatic mode, when cutting two sets of tape, take two pieces of tape and the machine will cut the two pieces of tape.
*note
1. Forcibly cutting high-adhesive tape will affect the service life of the motor.
2. After using the divider and auxiliary dividers, return to the bottom of the machine.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com