Guolian BOPP tape slitting and rewinding machine is used to cut and rewind the BOPP OPP tape into small rolls for daily use and carton packaging.
The machine is a complete production line including the main slitter rewinder, core loader, core cutter and mini doctor rewinder.
It is designed with a 4-axis automatic change. When the winding reaches the set length, it will switch from the other two axes to the next.
The machine adopts the latest Japanese tape cutting technology and is warmly welcomed by countries such as Europe, Middle East and America.
Can use models of different widths
Semi-automatic cutting machine technical operation rules
4. Mechanical operation
4.1 All parts must be carefully inspected before use and then tested. At the same time, check the gas distribution valves and torches and the connection path. If there is no problem, ignite and observe whether the flame is normal. If there is no problem, it can be cut.
4.2 When cutting straight lines, it is necessary to put a special track on the steel plate to be cut, select the cutting nozzle according to the cutting thickness, and adjust the speed before cutting.
4.3 Pressure automatic switch and pneumatic valve are normally open. When using automatic pressure switch, the knife switch at the label pressure switch should be pointed in the direction of closing. At this time, the pressure automatic switch is turned on during cutting. When walking, if the automatic switch is not used, the knife switch is pointed to the open position, so that the operation and stop of the cutting machine can be controlled only by controlling the on/off of the power label.
4.5 When cutting the circle, the radius rod should be installed in the screw hole of the body shell and locked, then the tip of the fixed needle should be placed in the hole of the pre-cut center, and the fixed needle can be adjusted to lift the cutting wheel of the cutting machine. To cut, if you need to cut the groove, you can reach the torch by turning it through a certain angle.
4.6 The forward and backward movement of the cutting machine (ie, forward and reverse operation) can be controlled by controlling the middle and reverse signs.
GL-704 Four-shaft Auto Roll Cutting Machine, Suitable for cutting BOPP tape, PVC insulation tape, masking tape, double sided tape, duct tape, medical tape, etc.
1.Main Motor: Cutting shaft and circular blade are driven by A.C motor with inverter control, which able to set RPM and running direction obverse/reserve on different requests.
2. Central Control: Central control system is CPU, which can cut various sizes on one log roll by changing modes automatically.
3. Display Mode: All functions are operated under LCD touch panel control, which is operator friendly and easy for data setting.
4. Width Setting: Width setting is controlled by servomotor with ball screw and guide rails to make accuracy movement.
5. Cutting System: Knife feeding is controlled by servomotor, which can do three-speed cutting.
6. Knife Angle Adjustment: Cutting angle can be changed automatically for making roll surface smoothly.
7. Shaft Change: Three kinds of cutting shafts for optional using on this machine, which use quick changing shaft according to different material.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc