The tape cutting process of the Guolian tape slitter is like this:
A roll of fabric, film or paper is loaded onto the shaft and the machine will roll or cut the fabric roll (film roll or roll) into small rolls of specified width.
For packaging food:
Large rolls of plastic film, such as biaxially oriented polypropylene (BOPP), paper or adhesive tape, are produced in large diameter rolls for maximum efficiency.
The tape is then cut into small rolls suitable for use in the packaging machine using a tape slitter.
Suitable for clothing and household items:
Large rolls of fabric or fabric can be cut into tape of various widths for use as a conduit or decoration on the garment.
And the slit tape can also be used as a raw material for the edge of the belt of the mattress or the decoration of the mattress frame.
Semi-automatic cutting machine technical operation rules
5. Control and monitoring methods for mechanical process parameters and characteristics
5.1 When installing the cross rail and main rail, pay attention to the adjustment screw should not be too tight or too loose. 5.2 The cutting tip should be installed so that it should not be tightened too tightly, no air leakage.
5.3 Before using the suction-type torch, the gas injection must be checked and pressed with the finger on the acetylene inlet valve head. Then open the oxygen valve and the acetylene valve. If there is suction on the finger, it means the torch is normal and can be used. If there is no suction, or oxygen flows back from the B-connector, the torch performance is abnormal and must be repaired.
6. Provisions for mechanical supervision and inspection
6.1 The cutting machine should pay attention to the good condition of each part in normal use, and solve the problem if it is found in time.
6.2 Strengthen maintenance and repairs should be carried out every year.
Automatic tape cutting machine --- Working principle
The automatic tape cutting machine is a small-scale automation device that is used on the assembly line to greatly improve production efficiency. There are basically two types: mechanical and electronic.
The mechanical type is disc type, and the common models are ZCUT-2 and upgraded zcut-8. The zcut-8 is favored by users because of its smaller size and more precise cutting.
The commonly used electronic models are M-1000 and ZCUT-9. Among them, ZCUT-9 tape cutting machine is more and more accepted by customers because of its precise cutting and easy maintenance.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc