Plastering Machine

Plastering Machine

 Guolian tape slitting machine - Application areas:

Manual cutting machine for PVC / masking tape / foam tape / double-sided tape / kraft paper tape / cloth tape / film large volume ... etc.

Plastering Machine

Guolian tape cutting machine GL-704 parameters:


LED directly displays size data;
Box-shaped cutting parts and replacement, saving time and effort, automation, high efficiency;
The tape has no trace, the slit is flat, and it is automatically cut off after automatic feeding. It is free to press the switch, cut the length of 20-999mm), set it arbitrarily, and automatically send the tape to cut.
specification:
Adhesive paper width: 7-50MM;
Applicable adhesive tape inner diameter: 25.32.75mm;
Adhesive paper set length: 20-999mm;
Size: 137*245*150mm;
Power: 18w;
Weight: 2.4kg;
Power supply: AC220V 50Hz.

Plastering Machine

Semi-automatic cutting machine technical operation rules

4. Mechanical operation
4.1 All parts must be carefully inspected before use and then tested. At the same time, check the gas distribution valves and torches and the connection path. If there is no problem, ignite and observe whether the flame is normal. If there is no problem, it can be cut.
4.2 When cutting straight lines, it is necessary to put a special track on the steel plate to be cut, select the cutting nozzle according to the cutting thickness, and adjust the speed before cutting.
4.3 Pressure automatic switch and pneumatic valve are normally open. When using automatic pressure switch, the knife switch at the label pressure switch should be pointed in the direction of closing. At this time, the pressure automatic switch is turned on during cutting. When walking, if the automatic switch is not used, the knife switch is pointed to the open position, so that the operation and stop of the cutting machine can be controlled only by controlling the on/off of the power label.
4.5 When cutting the circle, the radius rod should be installed in the screw hole of the body shell and locked, then the tip of the fixed needle should be placed in the hole of the pre-cut center, and the fixed needle can be adjusted to lift the cutting wheel of the cutting machine. To cut, if you need to cut the groove, you can reach the torch by turning it through a certain angle.
4.6 The forward and backward movement of the cutting machine (ie, forward and reverse operation) can be controlled by controlling the middle and reverse signs.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com