Guolian slitting machine product application:
The automatic tape log roll cutter is designed to cut large-diameter foam tape, double-sided tape, masking tape, non-woven tape, protective tape, PET, PE electrical tape, and a wide range of tape widths cut from large widths.
GL-704B tape cutting machine properties:
Adhesive tape: suitable for adhesive tape;
Non-stick material: suitable for non-stick materials;
Safety protection: 1 Safety protection function is provided 2 Safety design that does not work even if it is mistakenly inserted into the finger machine;
Length indicates: 1 tape length display is provided 2 If 2 to 3 lengths are set, tapes of different lengths will be cut in order;
Viscosity Non-tacky: Both viscous and non-adhesive tapes;
There is an incrementing down counter： 1 has an incrementing down counter 2 has a counting function for confirming the number of cuts;
Help memorize data： 1Help memorize data 2 Even if the power is turned off, the cut size can be memorized and displayed again;
Scotch tape translucent tape: transparent tape for translucent tape;
Automatic feeding belt: automatic feeding function;
Semi-automatic cutting machine technical operation rules
4. Mechanical operation
4.1 All parts must be carefully inspected before use and then tested. At the same time, check the gas distribution valves and torches and the connection path. If there is no problem, ignite and observe whether the flame is normal. If there is no problem, it can be cut.
4.2 When cutting straight lines, it is necessary to put a special track on the steel plate to be cut, select the cutting nozzle according to the cutting thickness, and adjust the speed before cutting.
4.3 Pressure automatic switch and pneumatic valve are normally open. When using automatic pressure switch, the knife switch at the label pressure switch should be pointed in the direction of closing. At this time, the pressure automatic switch is turned on during cutting. When walking, if the automatic switch is not used, the knife switch is pointed to the open position, so that the operation and stop of the cutting machine can be controlled only by controlling the on/off of the power label.
4.5 When cutting the circle, the radius rod should be installed in the screw hole of the body shell and locked, then the tip of the fixed needle should be placed in the hole of the pre-cut center, and the fixed needle can be adjusted to lift the cutting wheel of the cutting machine. To cut, if you need to cut the groove, you can reach the torch by turning it through a certain angle.
4.6 The forward and backward movement of the cutting machine (ie, forward and reverse operation) can be controlled by controlling the middle and reverse signs.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc