Pattern Cutting Machine

Pattern Cutting Machine

Guolian slitting machine product application:
The automatic tape log roll cutter is designed to cut large-diameter foam tape, double-sided tape, masking tape, non-woven tape, protective tape, PET, PE electrical tape, and a wide range of tape widths cut from large widths.

Pattern Cutting Machine

Tape cutting machine features ---

1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
12. Improve safety. When the warning device is operated and the tape cutter is suspended, even if the blockage is removed, the tape cutter will not operate immediately. You need to press the start button again to use it normally.

Pattern Cutting Machine

Automatic double sided adhesive tape cutting machine:

  • Function:

This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting.

Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material.

You can cut different sizes according to different material.

Features:

7. Round knife Angle adjustment system ( optional)The Mitsubishi servo motor control to calculate the circular knife Angle.According to different materials to do different angles change (adjustment range: + / -8 °  ) .If the cutting surface is not good, you can change the cutting Angle according.That will increase the production efficiency.

8. Automatic roll changing system (optional):  The cylinder drive positioning gear to drive the active spline.Make sure the fast and accurate change of log roll but without stopping during cutting,
Save the loading and unloading time and increase the productivity.

9.Fast cutting shaft changing system (optional):   3 different size cutting shafts for optional.

You can cutting different size paper core log roll in the fast shaft changing device.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com