National Union cutting machine application and features:
Suitable for slitting BOPP tape, aluminum foil tape, cellophane tape, etc.
1) Fully automatic four-axis exchange, fast work efficiency.
2) Variable speed adjustment of the inverter and the three-stage instrument counter to ensure the accuracy of the rewind length. It can automatically decelerate at high speeds.
3) The unwinding tension is controlled by a pneumatic brake, and the winding tension is controlled by two. With clutch and independent slide, the tension can be adjusted freely.
4) The arc drawing roller can eliminate the wrinkles of the tape and make the material flat for feeding.
5) Pneumatic braking stops the machine immediately to get the exact position and label.
The relationship between the tape cutting machine and the tape -
2: The tape mainly includes single-sided tape, double-sided tape, industrial tape, electronic tape, medical tape, acrylic tape, rubber tape, and silicone tape. The main substrate of the tape is paper, cloth, film, etc.; the support of the tape cutter is mainly a release paper, a release film, etc.; the adhesive has an acrylic adhesive, and a rubber adhesive. Substrate and support physical property testing focuses on basis weight, thickness, elongation, and release force; the focus of adhesive property testing is viscosity solid content. The physical properties of the tape are measured by coating amount, coating thickness, adhesion, holding power, adhesion from the back surface, drawing force, initial adhesion, weather resistance, heat resistance, solvent resistance, electrical conductivity, flame resistance, and the like.
Guolian Machinery -- GL-5000 Tape Cutting Machine
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.
The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.
Cutting length: 5 ~ 999 mm
Tape width: 6 ~ 50 mm
Maximum outer diameter: 300 mm
Speed: 200 mm/min
Weight: 2.8 kg
Size: 115mm X 140mm X 215mm
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc