National Union cutting machine application and features:
Suitable for slitting BOPP tape, aluminum foil tape, cellophane tape, etc.
1) Fully automatic four-axis exchange, fast work efficiency.
2) Variable speed adjustment of the inverter and the three-stage instrument counter to ensure the accuracy of the rewind length. It can automatically decelerate at high speeds.
3) The unwinding tension is controlled by a pneumatic brake, and the winding tension is controlled by two. With clutch and independent slide, the tension can be adjusted freely.
4) The arc drawing roller can eliminate the wrinkles of the tape and make the material flat for feeding.
5) Pneumatic braking stops the machine immediately to get the exact position and label.
Tape cutting machine features ---
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
12. Improve safety. When the warning device is operated and the tape cutter is suspended, even if the blockage is removed, the tape cutter will not operate immediately. You need to press the start button again to use it normally.
1300mm jumbo roll width tape manual cutting rewinding machine:
1. Simple structure, convenient operation and maintenance.
2. The power of the whole machine is only 3KW, which saves energy, the motor and the spindle are driven by the triangle belt, and the machine has low running noise.
3. The cutting shaft adopts high quality carbon steel, which is tempered, high frequency quenching and chromium plating (unilateral 0.05 mm). The hardness reaches HRC60, wear-resisting and cutting.
4. The cutting knife is carefully processed by W18Cr4V, with sharp edge and high durability.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc