Tape Cutting Machine - related instructions
The tape cutting machine is also a tape machine, which is an indispensable small auxiliary mechanical device for most production lines, but there is no specific explanation for the technical operation. The following is a description based on the operation of the tape cutting machine. The operation of the tape cutter is different from that of the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut, if cut. If the tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
-------Suitable for cutting BOPP tape, PVC insulation tape, masking tape, double sided tape, duct tape, medical tape, etc.
1. Main driving part: Siemens AC motor with inverter is employed.
2. Operating panel: All functions are operated on the 10" LCD touch panel.
3: Motor control system: The central control system is PLC programmable controller.
4. Central control unit: Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.
5. Blade feeding positioning system: Blade feeding is controlled by Mitsubishi servo motor,and the cutting speed is adjustable in three stages.
6. Auto angle adjustment of circular blade: Mitsubishi servo motor is used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is ±8°).
7. Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.
8. Cutting positioning system: Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
1300mm jumbo roll width tape manual cutting rewinding machine:
1. Simple structure, convenient operation and maintenance.
2. The power of the whole machine is only 3KW, which saves energy, the motor and the spindle are driven by the triangle belt, and the machine has low running noise.
3. The cutting shaft adopts high quality carbon steel, which is tempered, high frequency quenching and chromium plating (unilateral 0.05 mm). The hardness reaches HRC60, wear-resisting and cutting.
4. The cutting knife is carefully processed by W18Cr4V, with sharp edge and high durability.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc