Fibre Laser Cutting Machine

Fibre Laser Cutting Machine

Tape Cutting Machine - related instructions

The tape cutting machine is also a tape machine, which is an indispensable small auxiliary mechanical device for most production lines, but there is no specific explanation for the technical operation. The following is a description based on the operation of the tape cutting machine. The operation of the tape cutter is different from that of the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut, if cut. If the tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).

Fibre Laser Cutting Machine

GL-709 tape cutting machine

-------Cutting pvc tape, bopp tape,PE, PET, EVA, masking tape , foam tape ,double sided tape etc.

 

Product Description

 

1. Japan Mitsubishi Automatic PLC with touch screen control panel , 20 modes for size

   pre-setting each time & auto changing when cutting.  

2. Auto liquid silicon water spray cooling system: to avoid the adhesive sticking on the blade

    and ensure the smooth cutting.

3. AC motors for cutting blade and cutting shaft with inverters speed changing .

4. Positioning system for cutting: servo motor to control more accurate position.

5. Four shafts, double blades .

Fibre Laser Cutting Machine

Automatic double sided adhesive tape cutting machine:

  • Function:

This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting.

Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material.

You can cut different sizes according to different material.

Features:

7. Round knife Angle adjustment system ( optional)The Mitsubishi servo motor control to calculate the circular knife Angle.According to different materials to do different angles change (adjustment range: + / -8 °  ) .If the cutting surface is not good, you can change the cutting Angle according.That will increase the production efficiency.

8. Automatic roll changing system (optional):  The cylinder drive positioning gear to drive the active spline.Make sure the fast and accurate change of log roll but without stopping during cutting,
Save the loading and unloading time and increase the productivity.

9.Fast cutting shaft changing system (optional):   3 different size cutting shafts for optional.

You can cutting different size paper core log roll in the fast shaft changing device.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com