Laser Fiber Cutting Machine

Laser Fiber Cutting Machine

Tape Cutting Machine - related instructions

The tape cutting machine is also a tape machine, which is an indispensable small auxiliary mechanical device for most production lines, but there is no specific explanation for the technical operation. The following is a description based on the operation of the tape cutting machine. The operation of the tape cutter is different from that of the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut, if cut. If the tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).

Laser Fiber Cutting Machine

PVC insulation tape electrical tape cutting machine：

Product Application

The machine is suitable for cutting BOPP tapes, PVC tapes, PE tapes, masking paper tapes, double sided tapes, kraft paper tapes, foam tapes, duct tapes, industrial tapes, protective film, etc.

Parameter

efficient width: 1300mm, 1600mm

max. cutting diameter: 160mm

min. cutting width: 2mm

paper core ID: 38-76.2mm

diameter of circular blade: 180mm

size (L*W*H): 3000mm*1500mm*1550mm, 3500mm*1500mm*1550mm

 

Main Features

1) Easy to operate.

2) Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right.

3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, lineary or bit to make sure the cutting process accurate and perfect.

4) The face and back tube are supported by oil pressure to ensure the stability of mini pathway when it was cut.

5) Round knives cutting promotes the working efficiency.

Laser Fiber Cutting Machine

Aluminum Foil Tape/Kraft Paper Tape Double Sided Tape PET PVC OPP Slitting Rewinder Machine：

Usage:

The machine is suitable for slitting and rewinding various large roll materials,such as self-adhesive, paper,90goffset paper,PVC,plastic material,etc.

 

Main Characteristic:

1. The machine adopts two Servo motor control, automatic tension, center reeling way;

2. This machine adopts frequency control, to maintain smooth operation during acceleration

3.Auto counter meter, auto machine stop when had alarm.

4.The rewinding adopts A,B inflatable shaft,operate neatly and assemble conveniently.

5.The unwinding adopts ultrasonic wave correcting method.

6.The circular cutter with slitting slitter edge and automatic discharge device.

7,Air shaft automatic pneumatic loading structure.