Industrial Laser Cutting Machine

Industrial Laser Cutting Machine

Tape Cutting Machine - related instructions

         The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.
         The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.

Industrial Laser Cutting Machine

Guolian tape cutting machine GL-704 parameters:


LED directly displays size data;
Box-shaped cutting parts and replacement, saving time and effort, automation, high efficiency;
The tape has no trace, the slit is flat, and it is automatically cut off after automatic feeding. It is free to press the switch, cut the length of 20-999mm), set it arbitrarily, and automatically send the tape to cut.
specification:
Adhesive paper width: 7-50MM;
Applicable adhesive tape inner diameter: 25.32.75mm;
Adhesive paper set length: 20-999mm;
Size: 137*245*150mm;
Power: 18w;
Weight: 2.4kg;
Power supply: AC220V 50Hz.

Industrial Laser Cutting Machine

Tape cutting machine --- function
According to the application range of the tape cutter, the general tape cutter has the following functions: it can cut different materials such as tape, adhesive tape and protective film. You can simultaneously clamp two rolls of tape while cutting. Memory function, turn it off and then turn it on, and still save the original data. Cyclic cutting function, free to set different lengths of cyclic cutting, can cut different thickness of adhesive tape. The safety performance is high. The safety baffle is designed at the cutter. When the machine is blocked, the alarm device works automatically. Even if the blockage is cleared, the machine will not work immediately. You must press the start button again to continue working. Tape cutters are usually designed with no rollers.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com