Mdf Cutting Cnc Machine

Mdf Cutting Cnc Machine

Tape Cutting Machine - related instructions

         The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.
         The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.

Mdf Cutting Cnc Machine

The relationship between the tape cutting machine and the tape -

3: To say whether the tape cutting machine can meet the needs of customers, there is no doubt that in answering, Hongjin can definitely pick a tape cutting machine and label stripping machine suitable for customers, and the series of products of Hongjin automation equipment brand. , a total of 12 models. Guolian's tape cutting machine is the narrowest and can cut 3mm adhesive tape, the widest can cut 100mm adhesive tape, and the common specifications of several adhesive paper are 72mm, 60mm, 50mm, 36mm, etc.; Guolian tape cutting machine The length that can be cut is in the range of 5-999 mm. Common lengths are 65m, 75m, 106m. In addition to meeting the cutting requirements, Guolian's tape cutters have both manual and automatic modes, memory functions, and can also cut various types of adhesive tape.

Mdf Cutting Cnc Machine

GL-5000 tape cutter to cut two kinds of tape at the same time steps and precautions
If the tape width is less than 10 mm, insert the divider. This model can cut two tapes with a width of less than 25 mm at the same time.
1. Remove the divider from the bottom of the machine.
2. Press the press cover button to open the press cover.
3. If the tape width is less than 10 mm, insert the auxiliary spacer.
! Remove the auxiliary divider from the bottom of the machine and insert it into the junction of the divider.
4. Install the tape roll and move the width bar to adjust the tightness of the guide plate.
5. Import the tape and set the working mode.
! In the automatic mode, when cutting two sets of tape, take two pieces of tape and the machine will cut the two pieces of tape.
*note
1. Forcibly cutting high-adhesive tape will affect the service life of the motor.
2. After using the divider and auxiliary dividers, return to the bottom of the machine.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com