Tape Cutting Machine - related instructions
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.
The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.
Tape cutting machine features ---
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
Film /Paper/ fabric roll cut tape slitting machine is used for slitting or cutting various widths of materials into a small tape roll.
It is suitable for slitting or cutting: cloth, non-woven fabric, tent, umbrella, sponge foam, leather, reflective material, plastic, paper, double side adhesive tape, acetate various fabric, reinforced tape, electric conductive fabric, copper foil and etc.
and the tape slitting process is like this:
A roll of fabric, film or paper is loaded onto the axis, the machine will roll cut or slit this fabric roll ( film roll or paper roll ) into a small tape roll in designate width.
for packaging food:
large rolls of plastic film such as biaxially orientated polypropylene (BOPP), paper or adhsive tape is produced in large diameter roll for maxium efficiency.
the roll are then slit by a tape slitting machine into small rolls of the size to used on the packaging machine.
for Apparel and home use products:
large rolls of fabric or cloth can be slit into various width tape to used as the piping or decoration on the apparel.
and the slitted tape can also be used as the raw material for tape edging the mattress, or for mattress border decoration.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc