Tape Cutting Machine - related instructions
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.
The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.
PVC insulation tape electrical tape cutting machine：
The machine is suitable for cutting BOPP tapes, PVC tapes, PE tapes, masking paper tapes, double sided tapes, kraft paper tapes, foam tapes, duct tapes, industrial tapes, protective film, etc.
efficient width: 1300mm, 1600mm
max. cutting diameter: 160mm
min. cutting width: 2mm
paper core ID: 38-76.2mm
diameter of circular blade: 180mm
size (L*W*H): 3000mm*1500mm*1550mm, 3500mm*1500mm*1550mm
1) Easy to operate.
2) Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right.
3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, lineary or bit to make sure the cutting process accurate and perfect.
4) The face and back tube are supported by oil pressure to ensure the stability of mini pathway when it was cut.
5) Round knives cutting promotes the working efficiency.
This unit is suitable for cutting various materials such as PVC,OPP,PE,Masking tape,Double-dide tape,Kraft tape,cloth tape etc.
1:Main driving parts:Ac motor with inverter is employed and the acceleration and deceleration are fast and stable
2:Central control unit:programmable central control is used and various sizes can be set on the same shaft by antomatic transfer and cutting .
3:Operating panel:all functions are operated on the LCD touch panel
4:Auto adjusting the circular blade angle:the serco motor is subject to different materials
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc