Mdf Laser Cutting Machine

Mdf Laser Cutting Machine

Tape Cutting Machine - related instructions

         The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.
         The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.

Mdf Laser Cutting Machine

Single shaft automatic foam tape slitting cutting machine:

Product Usage:

The machine is suitable for cutting BOPP tapes, PVC tapes, PE tapes, masking paper tapes, double sided tapes, kraft paper tapes, foam tapes, duct tapes, industrial tapes, protective film, etc.

 

Main Features:

1) Easy to operate.

2) Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right.

3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, lineary or bit to make sure the cutting process accurate and perfect.

4) The face and back tube are supported by oil pressure to ensure the stability of mini pathway when it was cut.

5) Round knife cutting promotes the working efficiency.

Mdf Laser Cutting Machine

Foam tape and double side tape rewinding machine with CE:

Application:

Suitable for rewinding various tape such as BOPP tape, PE, PET, masking tape, double-sided tape, foam tape and paper, film etc many other adhesive and non-adhesive materials.

 

Features:

1) MITSUBISHI Servo motor and A.C. motor control

2) Programmable controller system, MITSUBISHI PLC control and LCD touch screen.

3) The tension is controlled by magnetic break.

4) Rewinding air shaft automatic air inflation system.

5) Automatic smoothing device to eliminate the wrinkle and air bubbles.

6) The pneumatic press roller is controlled by the cylinder and the products are properly pressed to ensure smooth during rewinding process.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com