Tape Cutting Machine - related instructions
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.
The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.
1. Introduction for Automatic adhesive tape cutting machine
1.1 Application: Bopp Tape, PVC Tape, Double Side Tape, Film and Paper
1.2 Working Width: 1.3m, 1.6m
1.3 Shafts Design: Single shaft, double shafts, four shafts etc.
1.4 Configuration: PLC control with Servo Motor
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc