Automatic tape cutting machine - Introduction:
The tape machine, also known as the tape cutter and tape cutter, is an object that can support a roll of tape and has mechanical means on the other end for cutting the tape. The cutting machine is divided into many types depending on the type of tape to be cut. The most common and most common are clear plastic cutting machines (like those often used in the office or at home), made of plastic; some may be consumables. Other tape cutters are fixed, and some machines have complex functions to control the feeding and cutting of the machine and are also ergonomic in use.
The relationship between the tape cutting machine and the tape -
2: The tape mainly includes single-sided tape, double-sided tape, industrial tape, electronic tape, medical tape, acrylic tape, rubber tape, and silicone tape. The main substrate of the tape is paper, cloth, film, etc.; the support of the tape cutter is mainly a release paper, a release film, etc.; the adhesive has an acrylic adhesive, and a rubber adhesive. Substrate and support physical property testing focuses on basis weight, thickness, elongation, and release force; the focus of adhesive property testing is viscosity solid content. The physical properties of the tape are measured by coating amount, coating thickness, adhesion, holding power, adhesion from the back surface, drawing force, initial adhesion, weather resistance, heat resistance, solvent resistance, electrical conductivity, flame resistance, and the like.
GL-5000 tape cutter to cut two kinds of tape at the same time steps and precautions
If the tape width is less than 10 mm, insert the divider. This model can cut two tapes with a width of less than 25 mm at the same time.
1. Remove the divider from the bottom of the machine.
2. Press the press cover button to open the press cover.
3. If the tape width is less than 10 mm, insert the auxiliary spacer.
! Remove the auxiliary divider from the bottom of the machine and insert it into the junction of the divider.
4. Install the tape roll and move the width bar to adjust the tightness of the guide plate.
5. Import the tape and set the working mode.
! In the automatic mode, when cutting two sets of tape, take two pieces of tape and the machine will cut the two pieces of tape.
1. Forcibly cutting high-adhesive tape will affect the service life of the motor.
2. After using the divider and auxiliary dividers, return to the bottom of the machine.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc