Automatic tape cutting machine - Introduction:
The tape machine, also known as the tape cutter and tape cutter, is an object that can support a roll of tape and has mechanical means on the other end for cutting the tape. The cutting machine is divided into many types depending on the type of tape to be cut. The most common and most common are clear plastic cutting machines (like those often used in the office or at home), made of plastic; some may be consumables. Other tape cutters are fixed, and some machines have complex functions to control the feeding and cutting of the machine and are also ergonomic in use.
Tape cutting machine features ---
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
12. Improve safety. When the warning device is operated and the tape cutter is suspended, even if the blockage is removed, the tape cutter will not operate immediately. You need to press the start button again to use it normally.
Film /Paper/ fabric roll cut tape slitting machine is used for slitting or cutting various widths of materials into a small tape roll.
It is suitable for slitting or cutting: cloth, non-woven fabric, tent, umbrella, sponge foam, leather, reflective material, plastic, paper, double side adhesive tape, acetate various fabric, reinforced tape, electric conductive fabric, copper foil and etc.
and the tape slitting process is like this:
A roll of fabric, film or paper is loaded onto the axis, the machine will roll cut or slit this fabric roll ( film roll or paper roll ) into a small tape roll in designate width.
for packaging food:
large rolls of plastic film such as biaxially orientated polypropylene (BOPP), paper or adhsive tape is produced in large diameter roll for maxium efficiency.
the roll are then slit by a tape slitting machine into small rolls of the size to used on the packaging machine.
for Apparel and home use products:
large rolls of fabric or cloth can be slit into various width tape to used as the piping or decoration on the apparel.
and the slitted tape can also be used as the raw material for tape edging the mattress, or for mattress border decoration.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc