Cnc Laser Wood Cutting Machine

Cnc Laser Wood Cutting Machine

Handheld Tape Cutting Machine - Introduction

      Some tape machines are small, and the tape machine and tape can be taken together where they are needed. This type of tape machine can easily cut the tape and the user can easily use the cut tape. It allows to be taken wherever the user wants to use it.

Cnc Laser Wood Cutting Machine

Tape cutting machine features ---

1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
12. Improve safety. When the warning device is operated and the tape cutter is suspended, even if the blockage is removed, the tape cutter will not operate immediately. You need to press the start button again to use it normally.

Cnc Laser Wood Cutting Machine

Factory sale double shaft pvc tape cutting machine：

Application：

This unit is suitable for cutting various materials such as PVC,OPP,PE,Masking tape,Double-dide tape,Kraft tape,cloth tape etc.

Feature:

1:Main driving parts:Ac motor with inverter is employed and the acceleration and deceleration are fast and stable

2:Central control unit:programmable central control is used and various sizes can be set on the same shaft by antomatic transfer and cutting .

3:Operating panel:all functions are operated on the LCD touch panel

4:Auto adjusting the circular blade angle:the serco motor is subject to different materials