Laser Cutting Machine 150w

Laser Cutting Machine 150w

Handheld Tape Cutting Machine - Introduction

      Some tape machines are small, and the tape machine and tape can be taken together where they are needed. This type of tape machine can easily cut the tape and the user can easily use the cut tape. It allows to be taken wherever the user wants to use it.

Laser Cutting Machine 150w

adhesive tape slitting machine/aluminum foil roll tape cutter/BOPP gum tape cutting machine:

Feature:

1. Main driving part: Taiwan AC motor with inverter is employed.

2. Central control unit: Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.

3. Operating panel: All functions are operated on the 10" LCD touch panel.

4. Motor control system: The central control system is PLC programmable controller.

5. Cutting positioning system: Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.

6. Blade feeding positioning system: Blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages.

7. Auto angle adjustment of circular blade: Mitsubishi servo motoris used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is ±8°).

8. Auto exchange device: cylinder-driven position spline gear is used to ensure fast & precise exchange; non-stop machine to save material loading & unloading time and improve efficiency.

9. Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.

Laser Cutting Machine 150w

Automatic double sided adhesive tape cutting machine:

• Function:

This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting.

Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material.

You can cut different sizes according to different material.

Features:

1. Main driving system:   AC motor with the frequency inverter.

Make sure the speed up or speed-down fast and steady during log roll cutting.

 
2. Central control unit: The programmable central control system.

You can cutting multiple sizes in the same log roll. 

 
3. Operating panel:  The 10'' big LCD panel.

You can set up various cutting model and monitor the cutting job directly in the panel.