Desktop Electronic Tape Cutting Machine - Introduction
Another type of desktop tape machine is powered by a belt and can cut the pressure sensitive tape to a preset length. This type of tape machine is mainly used in manufacturing and assembly lines to increase production efficiency. The use of this type of tape machine does not require manual adjustment of the length and then tears off over a period of time - ordinary tape machines in mass production and packaging locations are clearly not satisfactory. By automatically cutting the tape, the automatic tape cutter reduces waste caused by human error. It also reduces the time it takes to cut the tape, thereby reducing labor costs and increasing productivity.
Automatic tape cutting machine tape machine - Detailed introduction
1: Press the switch button to cut the adhesive tape, half a turn around the turntable.
2: The cutting distance is adjustable.
3: The unique conveyor system makes it easier to pick up than the edge of the turntable.
4: Small adhesive tape for use on the board.
5: The emission interval can be adjusted according to the bandwidth.
6: Various adhesive tapes can be cut and the incision is sharp.
7: Using a dedicated base, the outer diameter of the tape can reach 170mm
Cutting size 13-60mm
Tape width 3-25mm
Size: 300w*165h-170d MM;
Cutting size: 13-60MM;
Tape width: 3-25MM;
Reel size: inner diameter 25-32-75MM, outer diameter: Up to 130mm;
Applicable tape: vinyl tape, polyester film tape, polyethylene tape, acetate base tape, cellophane, masking tape, plain paper, glass cloth tape, aluminum foil tape, cotton tape, double-sided tape, etc.;
Power requirements: AC100V, 120V, 220±20VM 50-60HZ, 160W;
Guolian Machinery -- GL-5000 Tape Cutting Machine
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.
The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.
Cutting length: 5 ~ 999 mm
Tape width: 6 ~ 50 mm
Maximum outer diameter: 300 mm
Speed: 200 mm/min
Weight: 2.8 kg
Size: 115mm X 140mm X 215mm
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc