Desktop Electronic Tape Cutting Machine - Introduction
Another type of desktop tape machine is powered by a belt and can cut the pressure sensitive tape to a preset length. This type of tape machine is mainly used in manufacturing and assembly lines to increase production efficiency. The use of this type of tape machine does not require manual adjustment of the length and then tears off over a period of time - ordinary tape machines in mass production and packaging locations are clearly not satisfactory. By automatically cutting the tape, the automatic tape cutter reduces waste caused by human error. It also reduces the time it takes to cut the tape, thereby reducing labor costs and increasing productivity.
The relationship between the tape cutting machine and the tape -
3: To say whether the tape cutting machine can meet the needs of customers, there is no doubt that in answering, Hongjin can definitely pick a tape cutting machine and label stripping machine suitable for customers, and the series of products of Hongjin automation equipment brand. , a total of 12 models. Guolian's tape cutting machine is the narrowest and can cut 3mm adhesive tape, the widest can cut 100mm adhesive tape, and the common specifications of several adhesive paper are 72mm, 60mm, 50mm, 36mm, etc.; Guolian tape cutting machine The length that can be cut is in the range of 5-999 mm. Common lengths are 65m, 75m, 106m. In addition to meeting the cutting requirements, Guolian's tape cutters have both manual and automatic modes, memory functions, and can also cut various types of adhesive tape.
Semi-automatic cutting machine technical operation rules
4. Mechanical operation
4.1 All parts must be carefully inspected before use and then tested. At the same time, check the gas distribution valves and torches and the connection path. If there is no problem, ignite and observe whether the flame is normal. If there is no problem, it can be cut.
4.2 When cutting straight lines, it is necessary to put a special track on the steel plate to be cut, select the cutting nozzle according to the cutting thickness, and adjust the speed before cutting.
4.3 Pressure automatic switch and pneumatic valve are normally open. When using automatic pressure switch, the knife switch at the label pressure switch should be pointed in the direction of closing. At this time, the pressure automatic switch is turned on during cutting. When walking, if the automatic switch is not used, the knife switch is pointed to the open position, so that the operation and stop of the cutting machine can be controlled only by controlling the on/off of the power label.
4.5 When cutting the circle, the radius rod should be installed in the screw hole of the body shell and locked, then the tip of the fixed needle should be placed in the hole of the pre-cut center, and the fixed needle can be adjusted to lift the cutting wheel of the cutting machine. To cut, if you need to cut the groove, you can reach the torch by turning it through a certain angle.
4.6 The forward and backward movement of the cutting machine (ie, forward and reverse operation) can be controlled by controlling the middle and reverse signs.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc