Desktop Electronic Tape Cutting Machine - Introduction
Another type of desktop tape machine is powered by a belt and can cut the pressure sensitive tape to a preset length. This type of tape machine is mainly used in manufacturing and assembly lines to increase production efficiency. The use of this type of tape machine does not require manual adjustment of the length and then tears off over a period of time - ordinary tape machines in mass production and packaging locations are clearly not satisfactory. By automatically cutting the tape, the automatic tape cutter reduces waste caused by human error. It also reduces the time it takes to cut the tape, thereby reducing labor costs and increasing productivity.
GL-704B Four-shaft Auto Roll Cutting Machine, Suitable for cutting BOPP tape, PVC insulation tape, masking tape, double sided tape, duct tape, medical tape, etc.
1. Main driving part: Siemens AC motor with inverter is employed.
2.Operating panel part: All functions are operated on the 10" LCD touch panel.
3. Motor control system: The central control system is PLC programmable controller.
4. Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.
5. Central control unit: Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.
6. Blade feeding positioning system: Blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages.
7. Auto exchange device: Cylinder-driven position spline gear is used to ensure fast & precise exchange; non-stop machine to save material loading & unloading time and improve efficiency.
8. Cutting positioning system: Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
9. Auto angle adjustment of circular blade: Mitsubishi servo motor is used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is ±8°).
I.MAIN TECHNICAL PARAMETERS OF bopp tape slitting machine
1.1.Suitable base material: BOPP tape;
1.2.Valid width: 1300--1600 mm;
1.3.Maximum unwinding diameter: 800mm;
1.4.Maximum winding diameter: 150mm, four-position winder; 320mm, two-position winder
1.5.Diameter of paper core: 3”
1.6.Splitting width: 12-1580mm;
1.7.Mechanical speed: 0-180m/min;
1.8.Electricity: 380V, 50HZ;
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc
gl006@guolianjixie.com