Laser Cutting Machine For Metal

Laser Cutting Machine For Metal

Desktop Electronic Tape Cutting Machine - Introduction


      Another type of desktop tape machine is powered by a belt and can cut the pressure sensitive tape to a preset length. This type of tape machine is mainly used in manufacturing and assembly lines to increase production efficiency. The use of this type of tape machine does not require manual adjustment of the length and then tears off over a period of time - ordinary tape machines in mass production and packaging locations are clearly not satisfactory. By automatically cutting the tape, the automatic tape cutter reduces waste caused by human error. It also reduces the time it takes to cut the tape, thereby reducing labor costs and increasing productivity.

Laser Cutting Machine For Metal

GL-702 Double-shaft Auto Roll Cutting Machine

-------Suitable for cutting BOPP tape, PVC insulation tape, masking tape, double sided tape, duct tape, medical tape, etc.

 

Product Description

1.  Main driving part: Siemens AC motor with inverter is employed.

2. Operating panel: All functions are operated on the 10" LCD touch panel.

3: Motor control system: The central control system is PLC programmable controller. 

4. Central control unit:  Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.

5. Blade feeding positioning system:  Blade feeding is controlled by Mitsubishi servo motor,and the cutting speed is adjustable in three stages.

6. Auto angle adjustment of circular blade: Mitsubishi servo motor is used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is ±8°).

7. Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.

8. Cutting positioning system: Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.

Laser Cutting Machine For Metal

Servo Motor Automatic Adhesive Tape Cutting Machine:

Product Description

1. Introduction for Automatic adhesive tape cutting machine

1.1 Application: Bopp Tape, PVC Tape, Double Side Tape, Film and Paper

1.2 Working Width: 1.3m, 1.6m

1.3 Shafts Design: Single shaft, double shafts, four shafts etc.

1.4 Configuration: PLC control with Servo Motor

 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com