Small Fiber Laser Cutting Machine

Small Fiber Laser Cutting Machine

Semi-automatic tape cutters are usually divided into three categories:


     Lightweight: for simple, non-industrial use
     Industrial: A relatively solid paper cutter means you can work more than 8 hours a day.
     Heavy-duty: The most solid automatic tape cutter, which can withstand continuous use 24 hours a day, 7 days a week.
     

Small Fiber Laser Cutting Machine

The relationship between the tape cutting machine and the tape -

2: The tape mainly includes single-sided tape, double-sided tape, industrial tape, electronic tape, medical tape, acrylic tape, rubber tape, and silicone tape. The main substrate of the tape is paper, cloth, film, etc.; the support of the tape cutter is mainly a release paper, a release film, etc.; the adhesive has an acrylic adhesive, and a rubber adhesive. Substrate and support physical property testing focuses on basis weight, thickness, elongation, and release force; the focus of adhesive property testing is viscosity solid content. The physical properties of the tape are measured by coating amount, coating thickness, adhesion, holding power, adhesion from the back surface, drawing force, initial adhesion, weather resistance, heat resistance, solvent resistance, electrical conductivity, flame resistance, and the like.

Small Fiber Laser Cutting Machine

Semi-automatic cutting machine technical operation rules

7. Regular inspection of accuracy and variability
7.1 Detect the positive and negative turbulence of the main motion clutch after it is closed. The value is less than 2.0mm.
7.2 Detecting the running speed adjustment range of the host: the minimum speed is not more than 50mm/min, and the maximum speed is not less than 120mm/min.
7.3 Detecting the gas path part includes the connection of the connecting hose: air tightness: oxygen closed circuit 1.2Mpa, mixed gas path: 0.6 Mpa voltage regulation for 20 seconds shall not leak.
7.4 Detecting the thickness range of the cut steel plate: 10-100mm is acceptable.
7.5 Flame burning test of the torch (visible cutting oxygen flow length): 1#≥70mm; 2#≥90mm;3#≥100mm.
8. Daily maintenance regulations
8.1 After cutting the mouth, pay attention to the protective cover of the fashion, and do not bump.
8.2 Pay special attention to moisture when using and storing.
8.3 The lubricant in the gearbox should be replaced in time.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com