Semi-automatic tape cutters are usually divided into three categories:
Lightweight: for simple, non-industrial use
Industrial: A relatively solid paper cutter means you can work more than 8 hours a day.
Heavy-duty: The most solid automatic tape cutter, which can withstand continuous use 24 hours a day, 7 days a week.
Tape cutting machine features ---
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
12. Improve safety. When the warning device is operated and the tape cutter is suspended, even if the blockage is removed, the tape cutter will not operate immediately. You need to press the start button again to use it normally.
Suitable for rewinding various tape such as BOPP tape, PE, PET, masking tape, double-sided tape, foam tape and paper, film etc many other adhesive and non-adhesive materials.
1) MITSUBISHI Servo motor and A.C. motor control
2) Programmable controller system, MITSUBISHI PLC control and LCD touch screen.
3) The tension is controlled by magnetic break.
4) Rewinding air shaft automatic air inflation system.
5) Automatic smoothing device to eliminate the wrinkle and air bubbles.
6) The pneumatic press roller is controlled by the cylinder and the products are properly pressed to ensure smooth during rewinding process.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc