Low Cost Plastic Laser Cutting Machine

Low Cost Plastic Laser Cutting Machine

Semi-automatic tape cutters are usually divided into three categories:

Depending on the properties of the pressure-sensitive adhesive tape, the automatic tape cutter has many different functions and is divided into various models:

Adjustable pressure belt
The user is allowed to control the pressure exerted on the tape as the roller conveys the tape. This feature is especially useful for efficiently cutting tapes of different thicknesses.


Improved wheel
Depending on the type of tape being cut, many automatic tape dispensers are equipped with improved rollers to better cut narrow tapes, protective films, sponges and the like.


Photoreceptor
Many tape machines are equipped with a photoreceptor to detect the presence or absence of tape on the paper exit and then execute the tape feed command. The tape machine can also be equipped with two photoreceptors so that two rolls of tape can be cut at the same time.

Low Cost Plastic Laser Cutting Machine

The difference between the scope and model of the tape cutting machine

Protective film cutting machine TDA080-NMSR

Features:
It has the function of reducing the wrinkles and indentations generated by the roller on the protective film and the aluminum foil tape. Configure specially machined smooth rollers.
It has anti-static effect and can prevent the tape from adhering to the machine casing. Specialized heavy duty cutting machine for industrial use. Suitable for work of more than 8 hours a day.
A machine that uses metal parts and metal parts for maintenance and repair. Automatically transfer and cut automatically in a certain size. A grounding wire is required for the included 3-pin plug body.

Specifications:
Tape width: 13-80mm
Tape length setting range: 40-9999mm Maximum tape outer diameter: 230mm
Power supply: AC 100V 50/60Hz (117V, 230V is also available)

Low Cost Plastic Laser Cutting Machine

Semi-automatic cutting machine technical operation rules

5. Control and monitoring methods for mechanical process parameters and characteristics
5.1 When installing the cross rail and main rail, pay attention to the adjustment screw should not be too tight or too loose. 5.2 The cutting tip should be installed so that it should not be tightened too tightly, no air leakage.
5.3 Before using the suction-type torch, the gas injection must be checked and pressed with the finger on the acetylene inlet valve head. Then open the oxygen valve and the acetylene valve. If there is suction on the finger, it means the torch is normal and can be used. If there is no suction, or oxygen flows back from the B-connector, the torch performance is abnormal and must be repaired.
6. Provisions for mechanical supervision and inspection
6.1 The cutting machine should pay attention to the good condition of each part in normal use, and solve the problem if it is found in time.
6.2 Strengthen maintenance and repairs should be carried out every year.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com