50w Co2 Laser Engraving And Cutting Machine

50w Co2 Laser Engraving And Cutting Machine

Semi-automatic tape cutters are usually divided into three categories:

Depending on the properties of the pressure-sensitive adhesive tape, the automatic tape cutter has many different functions and is divided into various models:

Folding machine
The folding machine is a tape that is mounted on a tape machine to reinforce particularly thin tape or has a tendency to curl. Tapes produced by Mylar and Kapton usually have this trend.


Blade with safety plate
With this type of cymbal with a safety plate, the cutting blade does not work if there is an external object blocking the cutting area (such as fingers, tools, hard objects, etc.).


Programmable memory
With programmable memory, the user can store any of the preset auto-feed and cut lengths.


Interval switch
Allows the user to control the speed of automatic tape feeding and cutting tape.


Counter
Save the total number of tapes you have cut.

Foot switch
Use the foot switch to switch on the tape machine and let the user operate without hands. Send a piece of tape every time you step on it.

50w Co2 Laser Engraving And Cutting Machine

Automatic tape cutting machine tape machine - Detailed introduction
1: Press the switch button to cut the adhesive tape, half a turn around the turntable.
2: The cutting distance is adjustable.
3: The unique conveyor system makes it easier to pick up than the edge of the turntable.
4: Small adhesive tape for use on the board.
5: The emission interval can be adjusted according to the bandwidth.
6: Various adhesive tapes can be cut and the incision is sharp.
7: Using a dedicated base, the outer diameter of the tape can reach 170mm
Cutting size 13-60mm
Tape width 3-25mm
specification:
Size: 300w*165h-170d MM;
Cutting size: 13-60MM;
Tape width: 3-25MM;
Reel size: inner diameter 25-32-75MM, outer diameter: Up to 130mm;
Weight: 3kg
Applicable tape: vinyl tape, polyester film tape, polyethylene tape, acetate base tape, cellophane, masking tape, plain paper, glass cloth tape, aluminum foil tape, cotton tape, double-sided tape, etc.;
Power requirements: AC100V, 120V, 220±20VM 50-60HZ, 160W;

50w Co2 Laser Engraving And Cutting Machine

GL-5000 tape cutter to cut two kinds of tape at the same time steps and precautions
If the tape width is less than 10 mm, insert the divider. This model can cut two tapes with a width of less than 25 mm at the same time.
1. Remove the divider from the bottom of the machine.
2. Press the press cover button to open the press cover.
3. If the tape width is less than 10 mm, insert the auxiliary spacer.
! Remove the auxiliary divider from the bottom of the machine and insert it into the junction of the divider.
4. Install the tape roll and move the width bar to adjust the tightness of the guide plate.
5. Import the tape and set the working mode.
! In the automatic mode, when cutting two sets of tape, take two pieces of tape and the machine will cut the two pieces of tape.
*note
1. Forcibly cutting high-adhesive tape will affect the service life of the motor.
2. After using the divider and auxiliary dividers, return to the bottom of the machine.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com