Fabric Pattern Cutting Machine

Fabric Pattern Cutting Machine

Semi-automatic tape cutters are usually divided into three categories:

Depending on the properties of the pressure-sensitive adhesive tape, the automatic tape cutter has many different functions and is divided into various models:

Folding machine
The folding machine is a tape that is mounted on a tape machine to reinforce particularly thin tape or has a tendency to curl. Tapes produced by Mylar and Kapton usually have this trend.


Blade with safety plate
With this type of cymbal with a safety plate, the cutting blade does not work if there is an external object blocking the cutting area (such as fingers, tools, hard objects, etc.).


Programmable memory
With programmable memory, the user can store any of the preset auto-feed and cut lengths.


Interval switch
Allows the user to control the speed of automatic tape feeding and cutting tape.


Counter
Save the total number of tapes you have cut.

Foot switch
Use the foot switch to switch on the tape machine and let the user operate without hands. Send a piece of tape every time you step on it.

Fabric Pattern Cutting Machine

Tape cutter model difference ---

The tape cutter GL-5000 can be used for a variety of inner diameter tapes, and can also be used with two rolls of tape at the same time, without any error. The premise is that the two tapes are similar in material and have the same length to be cut so that one machine can cut two tapes at the same time. With electronic control system, it can electronically control the cutting length and reduce the error.

Fabric Pattern Cutting Machine

Semi-automatic cutting machine technical operation rules

4. Mechanical operation
4.1 All parts must be carefully inspected before use and then tested. At the same time, check the gas distribution valves and torches and the connection path. If there is no problem, ignite and observe whether the flame is normal. If there is no problem, it can be cut.
4.2 When cutting straight lines, it is necessary to put a special track on the steel plate to be cut, select the cutting nozzle according to the cutting thickness, and adjust the speed before cutting.
4.3 Pressure automatic switch and pneumatic valve are normally open. When using automatic pressure switch, the knife switch at the label pressure switch should be pointed in the direction of closing. At this time, the pressure automatic switch is turned on during cutting. When walking, if the automatic switch is not used, the knife switch is pointed to the open position, so that the operation and stop of the cutting machine can be controlled only by controlling the on/off of the power label.
4.5 When cutting the circle, the radius rod should be installed in the screw hole of the body shell and locked, then the tip of the fixed needle should be placed in the hole of the pre-cut center, and the fixed needle can be adjusted to lift the cutting wheel of the cutting machine. To cut, if you need to cut the groove, you can reach the torch by turning it through a certain angle.
4.6 The forward and backward movement of the cutting machine (ie, forward and reverse operation) can be controlled by controlling the middle and reverse signs.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com