Semi-automatic tape cutters are usually divided into three categories:
Depending on the properties of the pressure-sensitive adhesive tape, the automatic tape cutter has many different functions and is divided into various models:
The folding machine is a tape that is mounted on a tape machine to reinforce particularly thin tape or has a tendency to curl. Tapes produced by Mylar and Kapton usually have this trend.
Blade with safety plate
With this type of cymbal with a safety plate, the cutting blade does not work if there is an external object blocking the cutting area (such as fingers, tools, hard objects, etc.).
With programmable memory, the user can store any of the preset auto-feed and cut lengths.
Allows the user to control the speed of automatic tape feeding and cutting tape.
Save the total number of tapes you have cut.
Use the foot switch to switch on the tape machine and let the user operate without hands. Send a piece of tape every time you step on it.
Tape cutting machine features ---
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
12. Improve safety. When the warning device is operated and the tape cutter is suspended, even if the blockage is removed, the tape cutter will not operate immediately. You need to press the start button again to use it normally.
Fully Automatic Satin Ribbon Tape Cutting Machine:
The working principle of the automatic hydraulic cutting machine is down press to the mould,to cut material by dies / moulds.
suitable to die cut all non-metal soft /half-soft materials.From manual to full automatic type,serving for leather,fabric,EVA/EPE foam,blister packaging,rubber,sponge,automotive/plane etc.
Fully capacity in offering professional cutting solutions/feeding system as demands.
1. By computer,Electrical box,PLC control---more simple,fast and precision.
2. TWO-cylinders,four-columns,self-balancing connecting rod ----which can maintain equal pressure of each position.
3. Quite down but slow cut, more accurate,+ _ 0.01mm.
4. Hydraulic system, Central automatic lubrication systems can ensure precision and durability of the machine.
5. Feeding: Single or double auto feeding beds for choosing,more economical and 2 or 3 times improving producting capacity.
6. With micro motion system for installed Double dies.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc