Machine Paper Machine

Machine Paper Machine

Glued (water-active) tape cutting machine


      Glued (water-active) tape cutters measure, feed, wet and cut glued tape or water-activated tape. This type of tape usually consists of a paper base and glue, which is not viscous if it is activated without water. To accomplish this, these tape machines are usually equipped with a water bottle and a wetting brush to wet each piece of tape. Many tape cutters are also equipped with an upper heater that is mounted above the belt area to maximize the wetting of the tape – ideal for use in cold environments. Glued tape cutters are commonly used in packaging or shipping departments to package cartons.

Machine Paper Machine

Tape cutter model difference ---

The tape cutter GL-5000 can be used for a variety of inner diameter tapes, and can also be used with two rolls of tape at the same time, without any error. The premise is that the two tapes are similar in material and have the same length to be cut so that one machine can cut two tapes at the same time. With electronic control system, it can electronically control the cutting length and reduce the error.

Machine Paper Machine

Semi-automatic cutting machine technical operation rules

5. Control and monitoring methods for mechanical process parameters and characteristics
5.1 When installing the cross rail and main rail, pay attention to the adjustment screw should not be too tight or too loose. 5.2 The cutting tip should be installed so that it should not be tightened too tightly, no air leakage.
5.3 Before using the suction-type torch, the gas injection must be checked and pressed with the finger on the acetylene inlet valve head. Then open the oxygen valve and the acetylene valve. If there is suction on the finger, it means the torch is normal and can be used. If there is no suction, or oxygen flows back from the B-connector, the torch performance is abnormal and must be repaired.
6. Provisions for mechanical supervision and inspection
6.1 The cutting machine should pay attention to the good condition of each part in normal use, and solve the problem if it is found in time.
6.2 Strengthen maintenance and repairs should be carried out every year.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com