Core Drill Machine

Core Drill Machine

Glued (water-active) tape cutting machine


      Glued (water-active) tape cutters measure, feed, wet and cut glued tape or water-activated tape. This type of tape usually consists of a paper base and glue, which is not viscous if it is activated without water. To accomplish this, these tape machines are usually equipped with a water bottle and a wetting brush to wet each piece of tape. Many tape cutters are also equipped with an upper heater that is mounted above the belt area to maximize the wetting of the tape – ideal for use in cold environments. Glued tape cutters are commonly used in packaging or shipping departments to package cartons.

Core Drill Machine

Tape cutting machine features ---

1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
12. Improve safety. When the warning device is operated and the tape cutter is suspended, even if the blockage is removed, the tape cutter will not operate immediately. You need to press the start button again to use it normally.

Core Drill Machine

Automatic cold knife nylon webbing tape ribbon cutter tape cutting machine:

This machine is suitable for PP belt,zipper,nylon belt braided belt,elastic belt,magic stick,seat belt,shoulder belt,ribbon,tape,wire,casing,etc for Fixed length cutting.Suitable for belt,ready-made clothing,shoe making,leather bag,leather goods.Electronic and other manufacturing processing.

 

Features

1 High speed:                It can cut 100-120mm  pieces per minute (50mm length as an example)
2 High precision :         Cut-length is accurate owing to the control of microcomputer

3 section neat:            hot knife can heat-seal the section of color riband and light textile braid 
4 Knife :                          knife are made of imported high quality rolled steel,with long using life
5 Automatic operation: It works automatically only by setting length and quantity
6 Automatic stopper:    It stops automatically only by setting length and quantity.
7 Memory:                      Set-length,set-q'ty & set-speed are not erased even if power off & on 

8 Save document:         can save 9 documents,reduce setting time,if it's covenivent to take and operate

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com