Glued (water-active) tape cutting machine
Glued (water-active) tape cutters measure, feed, wet and cut glued tape or water-activated tape. This type of tape usually consists of a paper base and glue, which is not viscous if it is activated without water. To accomplish this, these tape machines are usually equipped with a water bottle and a wetting brush to wet each piece of tape. Many tape cutters are also equipped with an upper heater that is mounted above the belt area to maximize the wetting of the tape – ideal for use in cold environments. Glued tape cutters are commonly used in packaging or shipping departments to package cartons.
BOPP/Masking/Kraft/Foam Tape Automatic Cutting Machine:
Suitable for cutting various tape, such as: BOPP, PVC, PE, masking tape, double sided tape, kraft paper tape, foam tape, industrial tape and paper, film, etc.
1) Cutting shaft and circular blade are driven by MITSUBISH inverter and A.C motor.
2) The acceleration and deceleration are fast and steady and running direction: forward/reverse upon setting.
3) Cutting width setting is controlled by MITSUBISH servo motor, ball screw, guide rails for precise movement.
4) MITSUBISHI PLC programmable central control and all functions operate under LCD touch screen panel which is for all data setting.
5) Knife feeding is controlled by MITSUBISHI servo motor and the cutting speed is adjustable in 3 stages.
6) Circular blade angle auto adjustment is controlled by SANYO step motor or MITSUBISHI servo motor which is used to calculate the circular blade angle and the angle change is subject to different raw materials ( the angle change range is ±8°for single shaft cutting and ±3° for double shafts and four shafts cutting). The cutting angle is changed directly when the cutting surface is not smooth, so the efficiency is improved.
7) Three kinds of shafts size are available, quick change of shafts are suitable for different raw materials.
Automatic double sided adhesive tape cutting machine:
This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting.
Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material.
You can cut different sizes according to different material.
4. Motor control system: The PLC programmable controller.You can set up various cutting size in the same log roll.Can be adjusted cutting size according to the set up cutting width and cutting roll quantity.
5. Cutting size positioning system: The Mitsubishi servo motor control.Make sure the high accuracy of the ball screw and the linear slide rail positioning in the cutting.
6. Feed positioning system: The Hydraulic motor / Mitsubishi servo motor to control the knife feeding.It can be anthropomorphized as a three-step feeding speed of the cutter.
Improve efficiency and get the best quality.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc