Die Machine

Die Machine

Automatic tape cutting machine price and its working principle-


     The working principle of the tape cutting machine is actually the working principle of the laser tape cutting machine, and the technology applied by the laser tape cutting machine is a new cutting technology. Now this technology has been applied to various industries, including tape and metal cutting. A wide range of fields such as glass cutting and engraving. The price of such automatic tape cutters varies, and the price of the tape cutter is determined according to its model and function.
     The laser we usually know is actually a kind of light. It has the same emission principle as other light in nature, but the structure is very different. Although the laser is also light, the laser is dependent on spontaneous emission in the initial very short time. The subsequent process is completely determined by the excitation radiation. Therefore, the laser has a very pure color, almost no divergent directivity, and has a very high luminous intensity. . Through its high coherence, high strength, and high directivity, when the light is irradiated on the tape, the surface of the tape is subjected to strong thermal energy, causing the temperature to rise sharply, forming a rapid melting or vaporization, and completing the cutting. The automatic tape cutting machine we use works in the same way as the laser cutting machine. It only changes the laser to the blade, and the working efficiency is not reduced. Moreover, the blade can be switched after the blade is worn, which is convenient and simple. The price is also much better than the price of the laser tape cutter.

Die Machine

How to choose a self-adhesive laser cutting machine ---

       Small stickers, in many cases, are important manifestations of image and brand, which play an important role in reflecting product quality and causing consumers to purchase. Self-adhesive cutting solutions are constantly being optimized. From manual, die-cutting to laser cutting, how do we choose a self-adhesive laser cutting machine?
Self-adhesive is also called self-adhesive label material. It is a composite material with paper, film or special material as the fabric, adhesive on the back and silicone coated paper as the base paper. Packaging, commodities, chemicals, logistics, medicine, electronics and electrical appliances... More and more industries are applying stickers, and various packaging also use self-adhesive labels. Today, self-adhesive label cutting solutions have evolved from early manual cutting, die-cutting machines, and slitting machines to cutting with more advanced self-adhesive laser cutting machines.
Undoubtedly, self-adhesive laser cutting is a more fashionable and cost-effective solution. How to choose excellent laser equipment is the key. Self-adhesive laser cutting machine and laser engraving machine are widely used, powerful in function, simple in operation, and good in cutting products. They are listed as the preferred laser equipment products by many industries. Self-adhesive laser cutting machine, laser cutting machine tailored for self-adhesive cutting, has driven the development of the marking industry, and is a typical example of laser penetration into daily life.

Die Machine

Semi-automatic cutting machine technical operation rules

5. Control and monitoring methods for mechanical process parameters and characteristics
5.1 When installing the cross rail and main rail, pay attention to the adjustment screw should not be too tight or too loose. 5.2 The cutting tip should be installed so that it should not be tightened too tightly, no air leakage.
5.3 Before using the suction-type torch, the gas injection must be checked and pressed with the finger on the acetylene inlet valve head. Then open the oxygen valve and the acetylene valve. If there is suction on the finger, it means the torch is normal and can be used. If there is no suction, or oxygen flows back from the B-connector, the torch performance is abnormal and must be repaired.
6. Provisions for mechanical supervision and inspection
6.1 The cutting machine should pay attention to the good condition of each part in normal use, and solve the problem if it is found in time.
6.2 Strengthen maintenance and repairs should be carried out every year.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com