Automatic tape cutting machine tape machine - Detailed introduction
1: Press the switch button to cut the adhesive tape, half a turn around the turntable.
2: The cutting distance is adjustable.
3: The unique conveyor system makes it easier to pick up than the edge of the turntable.
4: Small adhesive tape for use on the board.
5: The emission interval can be adjusted according to the bandwidth.
6: Various adhesive tapes can be cut and the incision is sharp.
7: Using a dedicated base, the outer diameter of the tape can reach 170mm
Cutting size 13-60mm
Tape width 3-25mm
Size: 300w*165h-170d MM;
Cutting size: 13-60MM;
Tape width: 3-25MM;
Reel size: inner diameter 25-32-75MM, outer diameter: Up to 130mm;
Applicable tape: vinyl tape, polyester film tape, polyethylene tape, acetate base tape, cellophane, masking tape, plain paper, glass cloth tape, aluminum foil tape, cotton tape, double-sided tape, etc.;
Power requirements: AC100V, 120V, 220±20VM 50-60HZ, 160W;
GL-704B Four-shaft Auto Roll Cutting Machine, Suitable for cutting BOPP tape, PVC insulation tape, masking tape, double sided tape, duct tape, medical tape, etc.
1. Main driving part: Siemens AC motor with inverter is employed.
2.Operating panel part: All functions are operated on the 10" LCD touch panel.
3. Motor control system: The central control system is PLC programmable controller.
4. Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.
5. Central control unit: Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.
6. Blade feeding positioning system: Blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages.
7. Auto exchange device: Cylinder-driven position spline gear is used to ensure fast & precise exchange; non-stop machine to save material loading & unloading time and improve efficiency.
8. Cutting positioning system: Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
9. Auto angle adjustment of circular blade: Mitsubishi servo motor is used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is ±8°).
paper cutting machine, touch screen paper cutting machine, cutting machine with high quality and reasonable price.
1. Standard design, infrared raster protect (front), protective guard (back), high security.
2. Separate press and cutting device.
3. Oblique blade cutting tech.
4. Micro-adjust tech.
5. Double lead rail to push the paper pile.
6. Advance eclectric motor.
7. Programed control design.
8. Numerical display the cutting position.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc